|
Material Testing Machines |
|
|
We are engages in offering a wide range of Material Testing Machines that is designed & developed as per the industry standards. These are known for their optimum quality and excellent performance, and are used to receive accurate results & measurements. Available in various specifications, these machines are extensively used by builders and contractors as equipment for testing different material for strength and quality. Furthermore, we offer them at industries leading prices.
|
|
|
|
|
|
|
We offer torsion testing machines, which are designed to check torsional property of various metal wires, tubes and bars. Further, we also calibrate these machines as per the latest and relevant industry standards. Working Function:
- Torque applied to the specimen is transferred to measuring dial through lever mechanism
- Torque is measured by Pendulum Dynamometer system
- Torque ranges can be adjusted by required torque at other end of specimen
- Autographic recorder gives the relation between Torque and Angle of Twist
- Calibration is within ±1% within operating range of all models
Technical Specifications:
| Model | TTK - 10 | TTK - 20 | TTK - 50 | TTK - 100 | | Capacity | Nm. | 100 | 200 | 500 | 1000 | | Torque Ranges | Nm. | 20,50,100 | 50,100,200 | 50,100,250,500 | 100, 250, 500, 1000 | | Divisions on Dial | Nos. | 500 | 500 | 500 | 500 | | Test Speed | RPM | 0.5 | 0.5 | 0.5 | 0.5 | | Clearance Between Grips | mm | 0-420 | 0-450 | 0-500 | 0-600 | | Grips for Round
Specimen Dia | mm | 4-8
8-12 | 7-10
10-15
15-20 | 10-17
17-24
24-30 | 10-18
18-26
26-30 | | Grips for Flat Thick
Specimen Width | mm
mm | 2-8
25 | 3 - 10
30 | 2 - 12
40 | 5 - 15
50 | | Power Requirement 415 V 50.hz 3Phase | kW | 0.25 | 0.25 | 1.0 | 1.0 |
|
|
|
|
|
|
|
|
|
|
|
|
Universal Testing Machines |
We manufacture and supply a wide range of universal testing machines. These include computerized universal testing machines, digital universal testing machines, and mechanical universal testing machines. In addition to this, we also provide accessories for our range and offer retrofitting & modernization services. Our range of universal testing machines is used for conducting following tests: - Tensile test on metal, synthetic material etc.
- Compression tests on springs, rubber etc.
- Bending / transverse test on beams, synthetic material etc.
- Shear test on metals, polymers etc.
As per our modernization and retrofitting of any branded universal testing machines, we:
- Install suitable transducers in loading/measuring system for sensing, elongation or displacement
- Install suitable interfacing hardware like preamplifiers, A/D converters
- Install digital display in case conversion is in digital type machine
- Install relevant software on PC in case conversion is in PC based system
- Calibrate the machine after modification
Some more details of our universal testing machines are as follows:
Computerized Universal Testing Machines Computerized universal testing machine of UTK- UTK***E(PC) series are known for the following salient features: - Windows based click and go software package
- Supports tensile, compression, bending and many more tests
- Confirms BIS 1825 - 1991 and ISO - 7500 - 1986
- Standard / customer defined reports
- Compensated for main screw clearances and frame stiffness
- Extensive database support
PC based universal testing machines of UTK-***E(PC) consist of the following: - Hydraulic loading unit
- Hydraulic control console
- Electronic hardware interface
- High speed A/D converter
- Windows based software for displaying and analyzing test results
- Unlimited data base support (limited by PC hard disk capacity)
- Configured for variety of tests like tensile, compression transverse, & shear
- Can be upgraded without any major hardware change
Hydraulic Loading Unit of Universal testing machines UTK*** series consist of: - Hydraulic power pack to develop adequate hydraulic pressure to be applied on the specimen under test
- Flow control valves to smoothly control the rate of loading
- Machine table which moves up and down with hydraulic ram
- Chain and sprocket mechanism with geared motor to control movement of middle crosshead
- Upper crosshead connected to machine table through plane columns
- Main screws for adjusting and controlling position of middle crosshead
"See attachment for detailed information"
|
|
|
|
|
|
|
|
|
|
|
|
We are engaged in manufacturing and supplying of a comprehensive range of hardness testers. In our range of hardness testers, we offer Rockwell type hardness testers, brinell type hardness testers and vickers type hardness testers. These hardness testers are widely used to check the hardness of different metallic material & components before these are put into use. Some more details of our range of hardness testers are provided below:
Rockwell Type Hardness Testers These Rockwell type hardness testers are available in three basic versions such as Pure Rockwell Models, Rockwell cum Rockwell Superficial Models and Rockwell cum Brinell Models. We design and develop these hardness testers after rigorous research and stringent quality testing. Some of the general specifications of these hardness testers are as follows: - These models are ideal for testing hardness of metals and alloys
- All types of shapes, i.e. round, flat, and other irregular shapes like castings etc. can be tested on these machines
- All relevant fixtures can also be supplied
- These Testers are simple in design, easy to operate and maintain
- These meet the relevant National and International standards like BS 819 part I & II, ASTM- E18, ASTM - E10 etc.
"See attachment for detailed information"
|
|
|
|
|
|
|
|
|
|
|
|
We manufacture and offer a wide range of tensile testing machines to our clients. These are available in three different models such as computerized models, digital models and elector-mechanical models. Our tensile testing machines are widely used for conducting following tests: - Tensile test on metals, springs, rubber, & synthetic material
- Compression tests on springs, & rubber
- Bending/transverse test on synthetic material
Some more details of our tensile testing machines are provided below:
| Models | Specifications | | Computerized Models | - Loading with screw driven mechanism
- Equipped with PC based measuring system with "Click and Go" type Windows based software package
- Can be upgraded without any major hardware change
| | Digital Models | - Loading with screw driven mechanism
- Equipped with latest, state of the art microcontroller based measuring system
- Optional RS - 232 port for PC interface
| | Electro-Mechanical Models | - Loading with screw driven mechanism
- Equipped with large analog dial for reading load
- Autographic attachment for plotting. On line graph of Load vs Displacement
|
"See attachment for detailed information"
|
|
|
|
|
|
|
|
|
|
|
|
Compression Testing Machines |
We manufacture and offer quality range of compression testing machines. These are widely used in construction, rubber, spring manufacturing and similar other industries where compressive strength of the material is required to be tested. The machine is ideal for checking compressive strength of concrete blocks, bricks, rubber pads, and buffer springs. General Specifications:
- Loads are applied through Hydraulic loading system
- Material under test is kept between hardened and ground compression platens
Different types of measuring and display systems are available as under:
- Large dial type hydro-mechanical measuring system
- Digital load and displacement display system with graphic interface
- Computerized measuring system with windows based software package with extensive database support and graphic interface
These machines are known for grade I accuracy and are calibrated as per the relevant international standards such as BIS, ASTM, and ISO. "See attachment for detailed information"
|
|
|
|
|
|
|
|
|
|
|
|
We are one of the prominent organizations engaged in manufacturing and offering impact testing machines. Our range is available in two different models like charpy / izod model for metals and plastic impact testers. These testing machines find application in industries such as foundries, forge shops, rubber, and plastic. Some more details of our impact testing machines are as follows: Charpy / Izod Model for Metals:
| Models | Salient Features | | Mechanical Model | - Most suitable for metals
- Calibrated as per BS standard
- Can be supplied with motorized hammer lifting mechanism
| | Electronic Models | - Most suitable for metals
- Calibrated as per BS standard
- Can be supplied with motorized hammer lifting mechanism
- Built RS-232 port for PC Interface
|
Plastic Impact Testers:
- Most suitable for polymers and similar material
- Calibrated as per BS standard
"See attachment for detailed information"
|
|
|
|
|
|
|
|
|
|
|
|
Computerised Brinell Indentation Capture And Analysis System |
The 'bicas'virtually eliminates operator influence.
It is found that measuring brinell indentations can result in measurement errors between operators. This 'bicas' can virtually eliminate operator influence on test result.
Just place and click! 'bicas' is easy to operate. With this handy instrument entire test sequence is simple. Place the scan hand on the work piece on 'auto' in tool bar on computer screen. The 'bicas' automatically measures the diameter of indentation with resolution of 0. 01mm and display brinell value with diameter measurement. All data storage functions are automatically performed according to batch parameters.
The 'bicas' can be configured to meet your needs. an unlimited number of batches can be created each with its own test parameters and certificates. The operator can select test load and indentor size with arty name, address, certificate no. Date batch no. And description, high and low limits for readings etc. The previous batches can be reopened for viewing and address change etc. The 'bicas' has built in statistical capabilities with graph and certificate for report generation and printing. It includes frequency distribution and variation graphs. the systems includes calibration and check facilities to calibrate the systems and for checking of calibration. This eliminates any systems error in measurement. The software includes: - Facility for auto / semi auto / manual modes of operation
- Well managed database saves readings w. R. T. Batch and certificate
- Report generation in the form of certificate and graph as per customer requirements
- Facility for calibration and check of calibration
Specification: The range of measurement is from 1mm to 6 mm of diameter with resolution of 0. 01mm. Applications: - To measure brinell hardness directly on machine where presently brinell-microscope is used. This avoids eye straining of operator on production testing. In addition it gives far better repeated accuracy. High-low limits selections enables operator easy acceptance or rejection of components
- Can be connected to laptop or desktop pc. Easy to carry anywhere and handy for use with easy setup
Scope of supply: - One hand held unit containing ccd camera, optics and illumination systems with connecting cable
- External video capture with usb 2 connectivity and driver software
- Brinell indentation capture and analysis system 'bicas'
- PC (pentium 4) or laptop and windows xp operating systems is to be procured by customer
- One USB 2. 0 is required
|
|
|
|
|
|
|
